Nitro Tuff Abrasive Technology | Thru Tubing Solutions

You are here

Nitro Tuff Abrasive Technology Services

Thru Tubing Solutions prides itself on a commitment of continual improvement. By expanding upon proven technologies and practices in the industry, the Nitro Tuff abrasive technology was developed to provide a safer alternative to conventional methods. Instead of using explosives or wireline perforating, Nitro Tuff uses a mixture of sand, water, and gel for tubular cutting and perforating. 

Whether perforating, cutting, or slotting, TTS can provide fit-for-purpose tools with abrasive perforating technology that tackle challenges with unique solutions. Get in touch with a specialist from TTS in your region by filling out our online form. A specialist will contact you shortly with additional information and answers to any of your service-related questions. 

Description

The patented Bypassing Perforator system allows the operation of tools below the perforator, the perforator itself, and then below the perforator again in a single run. This system is typically run with a motor for toe prep operations to provide a means of milling/cleaning to bottom before and after perforating.

 

Before singling in on details and specifications for your system, we highly recommend contacting a representative at Thru Tubing Solutions. By doing so, you will be sure to receive the correct components for your operation. Every perforating operation  is unique to each customers  situation. Small changes could be necessary even with similar circumstances. 

Key features
  • Single Trip Flow-Thru/Perforate/Flow-Thru
  • Proven Perforating Technology
System components
i
Carbide Mill

The standard for normal cleanouts, the carbide mill can have any combination of shapes and sizes to meet customer needs.

i
Titan Motor

This rugged downhole motor provides many hours of reliable service under demanding operating conditions. 

i
Bypassing Perforator

Allows operation of tools below the perforator prior and after a series of perforations are made. 

i
Hydraulic Disconnect

Used for releasing the coiled tubing from the BHA if it becomes stuck in the wellbore. 

i
Back Pressure Valve

Prevents flow to the bottom hole assembly. 

i
Coiled Tubing Connector

External slip type coiled tubing connector provides a means of connecting a BHA to the end of coiled tubing.