Cutting Overshot
The Snipper Overshot is used to cut and retrieve coiled tubing that has been parted, stuck or abandoned in the well bore. Once the appropriate overpull is reached screws are sheared causing the blades to sever the coiled tubing. A clean fishing neck is left looking up.
Key Features
- Retrieve Cut Segment
- Reduced Overpull & Necking of Coil
- Leaves Clean Cut
- Coiled Tubing or Threaded Pipe
| O.D. | I.D. | Length | Tensile | Torque | Catch Range | Connection | |
|---|---|---|---|---|---|---|---|
| in mm | in mm | ft m | lbs kg | ft-lbs Nm | in | ||
| 2.06 52.4 | 1.31 33.4 | 1.96 0.60 | 65,000 29,484 | 1,360 1,844 | 1" to 1-1/4" | 1-1/2" CS | |
| 2.50 63.5 | 1.56 39.7 | 2.98 0.91 | 74,000 33,566 | 2,440 3,308 | 1-1/2" | 2-1/16" CS | |
| 2.70 68.6 | 1.81 46.1 | 3.25 0.99 | 62,000 28,123 | 2,250 3,051 | 1-1/4" to 1-3/4" | 2-3/8" CS | |
| 3.38 85.7 | 2.13 53.9 | 2.90 0.88 | 91,000 41,280 | 4,580 6,210 | 1-3/4" to 2" | 2-7/8" CS |
